Variables ==================== py-install-directory -------------------- Directory where python-mode.el and it's subdirectories should be installed. Needed for completion and other environment stuff only. python-mode-modeline-display ---------------------------- String to display in Emacs modeline py-extensions ------------- File where extensions to python-mode.el should be installed. Used by virtualenv support. info-lookup-mode ---------------- Which Python documentation should be queried. Make sure it's accessible from Emacs by M-x info RET ... See INSTALL-INFO-FILES for help. py-fast-process-p ----------------- Use `py-fast-process'. Commands prefixed "py-fast-..." suitable for large output See: large output makes Emacs freeze, lp:1253907 Results arrive in output buffer, which is not in comint-mode py-sexp-use-expression-p ------------------------ If non-nil, C-M-s call py-forward-expression. Respective C-M-b will call py-backward-expression Default is t py-shell-unfontify-p -------------------- Run `py--run-unfontify-timer' unfontifying the shell banner-text. Default is nil py-session-p ------------ If commands would use an existing process. If nil, a maybe existing process at py-buffer-name would be killed and re-started See also `py-dedicated-process-p' py-max-help-buffer-p -------------------- If "*Python-Help*"-buffer should appear as the only visible. Default is nil. In help-buffer, "q" will close it. py-highlight-error-source-p --------------------------- When py-execute-... commands raise an error, respective code in source-buffer will be highlighted. Default is nil. M-x `py-remove-overlays-at-point' removes that highlighting. py-set-pager-cat-p ------------------ If the shell environment variable $PAGER should set to `cat'. If `t', use `C-c C-r' to jump to beginning of output. Then scroll normally. Avoids lp:783828, "Terminal not fully functional", for help('COMMAND') in python-shell When non-nil, imports module `os' py-empty-line-closes-p ---------------------- When non-nil, dedent after empty line following block if True: print("Part of the if-statement") print("Not part of the if-statement") Default is nil If non-nil, a C-j from empty line dedents. py-prompt-on-changed-p ---------------------- When called interactively, ask for save before a changed buffer is sent to interpreter. Default is `t' py-dedicated-process-p ---------------------- If commands executing code use a dedicated shell. Default is nil When non-nil and `py-session-p', an existing dedicated process is re-used instead of default - which allows executing stuff in parallel. py-store-result-p ----------------- When non-nil, put resulting string of `py-execute-...' into kill-ring, so it might be yanked. Default is nil py-update-gud-pdb-history-p --------------------------- If pdb should provide suggestions WRT file to check and py-pdb-path. Default is t See lp:963253 py-pdb-executable ----------------- Indicate PATH/TO/pdb. Default is nil See lp:963253 py-hide-show-minor-mode-p ------------------------- If hide-show minor-mode should be on, default is nil. py-load-skeletons-p ------------------- If skeleton definitions should be loaded, default is nil. If non-nil and abbrev-mode on, block-skeletons will inserted. Pressing "if" for example will prompt for the if-condition. py-if-name-main-permission-p ---------------------------- Allow execution of code inside blocks started by "if __name__== '__main__':". Default is non-nil py-use-font-lock-doc-face-p --------------------------- If documention string inside of def or class get `font-lock-doc-face'. `font-lock-doc-face' inherits `font-lock-string-face'. Call M-x `customize-face' in order to have a visible effect. py-empty-comment-line-separates-paragraph-p ------------------------------------------- Consider paragraph start/end lines with nothing inside but comment sign. Default is non-nil py-indent-honors-inline-comment ------------------------------- If non-nil, indents to column of inlined comment start. Default is nil. py-auto-fill-mode ----------------- If python-mode should set fill-column according values in `py-comment-fill-column' and `py-docstring-fill-column'. Default is nil py-error-markup-delay --------------------- Seconds error's are highlighted in exception buffer. py-fast-completion-delay ------------------------ Used by py--fast-send-string-intern. py-new-shell-delay ------------------ If a new comint buffer is connected to Python, commands like completion might need some delay. py-autofill-timer-delay ----------------------- Delay when idle before functions ajusting `py-docstring-fill-column' resp. `py-comment-fill-column' are called. py-docstring-fill-column ------------------------ Value of `fill-column' to use when filling a docstring. Any non-integer value means do not use a different value of `fill-column' when filling docstrings. py-comment-fill-column ---------------------- Value of `fill-column' to use when filling a comment. Any non-integer value means do not use a different value of `fill-column' when filling docstrings. py-fontify-shell-buffer-p ------------------------- If code in Python shell should be highlighted as in script buffer. Default is nil. If `t', related vars like `comment-start' will be set too. Seems convenient when playing with stuff in IPython shell Might not be TRT when a lot of output arrives py-modeline-display-full-path-p ------------------------------- If the full PATH/TO/PYTHON should be displayed in shell modeline. Default is nil. Note: when `py-shell-name' is specified with path, it's shown as an acronym in buffer-name already. py-modeline-acronym-display-home-p ---------------------------------- If the modeline acronym should contain chars indicating the home-directory. Default is nil py-timer-close-completions-p ---------------------------- If `py-timer-close-completion-buffer' should run, default is non-nil. py-smart-operator-mode-p ------------------------ If python-mode calls `smart-operator-mode-on' Default is nil. py-autopair-mode ---------------- If python-mode calls (autopair-mode-on) Default is nil Load `autopair-mode' written by Joao Tavora URL: http://autopair.googlecode.com py-indent-no-completion-p ------------------------- If completion function should insert a TAB when no completion found. Default is `nil' py-company-pycomplete-p ----------------------- Load company-pycomplete stuff. Default is nil py-auto-complete-p ------------------ Run python-mode's built-in auto-completion via py-complete-function. Default is nil py-tab-shifts-region-p ---------------------- If `t', TAB will indent/cycle the region, not just the current line. Default is nil See also `py-tab-indents-region-p' py-tab-indents-region-p ----------------------- When `t' and first TAB doesn't shift, indent-region is called. Default is nil See also `py-tab-shifts-region-p' py-block-comment-prefix-p ------------------------- If py-comment inserts py-block-comment-prefix. Default is t py-org-cycle-p -------------- When non-nil, command `org-cycle' is available at shift-TAB, Default is nil. py-set-complete-keymap-p ------------------------ If `py-complete-initialize', which sets up enviroment for Pymacs based py-complete, should load it's keys into `python-mode-map' Default is nil. See also resp. edit `py-complete-set-keymap' py-outline-minor-mode-p ----------------------- If outline minor-mode should be on, default is `t'. py-guess-py-install-directory-p ------------------------------- If in cases, `py-install-directory' isn't set, `py-set-load-path'should guess it from `buffer-file-name'. py-load-pymacs-p ---------------- If Pymacs related stuff should be loaded. Default is nil. Pymacs has been written by François Pinard and many others. See original source: http://pymacs.progiciels-bpi.ca py-verbose-p ------------ If functions should report results. Default is nil. py-sexp-function ---------------- When set, it's value is called instead of `forward-sexp', `backward-sexp' Default is nil. py-close-provides-newline ------------------------- If a newline is inserted, when line after block isn't empty. Default is non-nil. When non-nil, `py-end-of-def' and related will work faster py-dedent-keep-relative-column ------------------------------ If point should follow dedent or kind of electric move to end of line. Default is t - keep relative position. py-indent-honors-multiline-listing ---------------------------------- If `t', indents to 1+ column of opening delimiter. If `nil', indent adds one level to the beginning of statement. Default is `nil'. py-indent-paren-spanned-multilines-p ------------------------------------ If non-nil, indents elements of list a value of `py-indent-offset' to first element: def foo(): if (foo && baz): bar() Default lines up with first element: def foo(): if (foo && baz): bar() py-closing-list-dedents-bos --------------------------- When non-nil, indent list's closing delimiter like start-column. It will be lined up under the first character of the line that starts the multi-line construct, as in: my_list = [ 1, 2, 3, 4, 5, 6, ] result = some_function_that_takes_arguments( 'a', 'b', 'c', 'd', 'e', 'f', ) Default is nil, i.e. my_list = [ 1, 2, 3, 4, 5, 6, ] result = some_function_that_takes_arguments( 'a', 'b', 'c', 'd', 'e', 'f', ) Examples from PEP8 py-imenu-max-items ------------------ Python-mode specific `imenu-max-items' py-closing-list-space --------------------- Number of chars, closing parenthesis outdent from opening, default is 1 py-max-specpdl-size ------------------- Heuristic exit. Limiting number of recursive calls by py-forward-statement and related functions. Default is max-specpdl-size. This threshold is just an approximation. It might set far higher maybe. See lp:1235375. In case code is not to navigate due to errors, `which-function-mode' and others might make Emacs hang. Rather exit than. py-closing-list-keeps-space --------------------------- If non-nil, closing parenthesis dedents onto column of opening plus `py-closing-list-space', default is nil py-electric-kill-backward-p --------------------------- Affects `py-electric-backspace'. Default is nil. If behind a delimited form of braces, brackets or parentheses, backspace will kill it's contents With when cursor after my_string[0:1] --------------^ ==> my_string[] ----------^ In result cursor is insided emptied delimited form. py-electric-colon-active-p -------------------------- `py-electric-colon' feature. Default is `nil'. See lp:837065 for discussions. See also `py-electric-colon-bobl-only' py-electric-colon-bobl-only --------------------------- When inserting a colon, do not indent lines unless at beginning of block See lp:1207405 resp. `py-electric-colon-active-p' py-electric-yank-active-p ------------------------- When non-nil, `yank' will be followed by an `indent-according-to-mode'. Default is nil py-electric-colon-greedy-p -------------------------- If py-electric-colon should indent to the outmost reasonable level. If nil, default, it will not move from at any reasonable level. py-electric-colon-newline-and-indent-p -------------------------------------- If non-nil, `py-electric-colon' will call `newline-and-indent'. Default is `nil'. py-electric-comment-p --------------------- If "#" should call `py-electric-comment'. Default is `nil'. py-electric-comment-add-space-p ------------------------------- If py-electric-comment should add a space. Default is `nil'. py-mark-decorators ------------------ If py-mark-def-or-class functions should mark decorators too. Default is `nil'. py-defun-use-top-level-p ------------------------ When non-nil, keys C-M-a, C-M-e address top-level form. Default is nil. Beginning- end-of-defun forms use commands `py-beginning-of-top-level', `py-end-of-top-level' mark-defun marks top-level form at point etc. py-tab-indent ------------- Non-nil means TAB in Python mode calls `py-indent-line'. py-return-key ------------- Which command should call. py-complete-function -------------------- When set, enforces function todo completion, default is `py-fast-complete'. Might not affect IPython, as `py-shell-complete' is the only known working here. Normally python-mode knows best which function to use. py-encoding-string ------------------ Default string specifying encoding of a Python file. py-shebang-startstring ---------------------- Detecting the shell in head of file. py-flake8-command ----------------- Which command to call flake8. If empty, python-mode will guess some py-flake8-command-args ---------------------- Arguments used by flake8. Default is the empty string. py-message-executing-temporary-file ----------------------------------- If execute functions using a temporary file should message it. Default is `t'. Messaging increments the prompt counter of IPython shell. py-execute-no-temp-p -------------------- Seems Emacs-24.3 provided a way executing stuff without temporary files. py-lhs-inbound-indent --------------------- When line starts a multiline-assignment: How many colums indent should be more than opening bracket, brace or parenthesis. py-continuation-offset ---------------------- Additional amount of offset to give for some continuation lines. Continuation lines are those that immediately follow a backslash terminated line. py-indent-tabs-mode ------------------- Python-mode starts `indent-tabs-mode' with the value specified here, default is nil. py-smart-indentation -------------------- Should `python-mode' try to automagically set some indentation variables? When this variable is non-nil, two things happen when a buffer is set to `python-mode': 1. `py-indent-offset' is guessed from existing code in the buffer. Only guessed values between 2 and 8 are considered. If a valid guess can't be made (perhaps because you are visiting a new file), then the value in `py-indent-offset' is used. 2. `tab-width' is setq to `py-indent-offset' if not equal already. `indent-tabs-mode' inserts one tab one indentation level, otherwise spaces are used. Note that both these settings occur *after* `python-mode-hook' is run, so if you want to defeat the automagic configuration, you must also set `py-smart-indentation' to nil in your `python-mode-hook'. py-block-comment-prefix ----------------------- String used by M-x comment-region to comment out a block of code. This should follow the convention for non-indenting comment lines so that the indentation commands won't get confused (i.e., the string should be of the form `#x...' where `x' is not a blank or a tab, and `...' is arbitrary). However, this string should not end in whitespace. py-indent-offset ---------------- Amount of offset per level of indentation. `M-x py-guess-indent-offset' can usually guess a good value when you're editing someone else's Python code. py-backslashed-lines-indent-offset ---------------------------------- Amount of offset per level of indentation of backslashed. No semantic indent, which diff to `py-indent-offset' indicates py-pdb-path ----------- Where to find pdb.py. Edit this according to your system. If you ignore the location `M-x py-guess-pdb-path' might display it. py-indent-comments ------------------ When t, comment lines are indented. py-uncomment-indents-p ---------------------- When non-nil, after uncomment indent lines. py-separator-char ----------------- Values set by defcustom only will not be seen in batch-mode. py-custom-temp-directory ------------------------ If set, will take precedence over guessed values from `py-temp-directory'. Default is the empty string. py-beep-if-tab-change --------------------- Ring the bell if `tab-width' is changed. If a comment of the form # vi:set tabsize=: is found before the first code line when the file is entered, and the current value of (the general Emacs variable) `tab-width' does not equal , `tab-width' is set to , a message saying so is displayed in the echo area, and if `py-beep-if-tab-change' is non-nil the Emacs bell is also rung as a warning. py-jump-on-exception -------------------- Jump to innermost exception frame in Python output buffer. When this variable is non-nil and an exception occurs when running Python code synchronously in a subprocess, jump immediately to the source code of the innermost traceback frame. py-ask-about-save ----------------- If not nil, ask about which buffers to save before executing some code. Otherwise, all modified buffers are saved without asking. py-delete-function ------------------ Function called by `py-electric-delete' when deleting forwards. py-pdbtrack-do-tracking-p ------------------------- Controls whether the pdbtrack feature is enabled or not. When non-nil, pdbtrack is enabled in all comint-based buffers, e.g. shell buffers and the *Python* buffer. When using pdb to debug a Python program, pdbtrack notices the pdb prompt and displays the source file and line that the program is stopped at, much the same way as gud-mode does for debugging C programs with gdb. py-pdbtrack-filename-mapping ---------------------------- Supports mapping file paths when opening file buffers in pdbtrack. When non-nil this is an alist mapping paths in the Python interpreter to paths in Emacs. py-pdbtrack-minor-mode-string ----------------------------- String to use in the minor mode list when pdbtrack is enabled. py-import-check-point-max ------------------------- Maximum number of characters to search for a Java-ish import statement. When `python-mode' tries to calculate the shell to use (either a CPython or a Jython shell), it looks at the so-called `shebang' line -- i.e. #! line. If that's not available, it looks at some of the file heading imports to see if they look Java-like. py-jython-packages ------------------ Imported packages that imply `jython-mode'. py-current-defun-show --------------------- If `py-current-defun' should jump to the definition, highlight it while waiting PY-WHICH-FUNC-DELAY seconds, before returning to previous position. Default is `t'. py-current-defun-delay ---------------------- When called interactively, `py-current-defun' should wait PY-WHICH-FUNC-DELAY seconds at the definition name found, before returning to previous position. py-python-send-delay -------------------- Seconds to wait for output, used by `py--send-...' functions. See also py-ipython-send-delay py-ipython-send-delay --------------------- Seconds to wait for output, used by `py--send-...' functions. See also py-python-send-delay py-master-file -------------- If non-nil, M-x py-execute-buffer executes the named master file instead of the buffer's file. If the file name has a relative path, the value of variable `default-directory' for the buffer is prepended to come up with a file name. Beside you may set this variable in the file's local variable section, e.g.: # Local Variables: # py-master-file: "master.py" # End: py-pychecker-command -------------------- Shell command used to run Pychecker. py-pychecker-command-args ------------------------- String arguments to be passed to pychecker. py-pyflakes-command ------------------- Shell command used to run Pyflakes. py-pyflakes-command-args ------------------------ String arguments to be passed to pyflakes. Default is "" py-pep8-command --------------- Shell command used to run pep8. py-pep8-command-args -------------------- String arguments to be passed to pylint. Default is "" py-pyflakespep8-command ----------------------- Shell command used to run `pyflakespep8'. py-pyflakespep8-command-args ---------------------------- string arguments to be passed to pyflakespep8. Default is "" py-pylint-command ----------------- Shell command used to run Pylint. py-pylint-command-args ---------------------- String arguments to be passed to pylint. Default is "--errors-only" py-shell-input-prompt-1-regexp ------------------------------ A regular expression to match the input prompt of the shell. py-shell-input-prompt-2-regexp ------------------------------ A regular expression to match the input prompt of the shell after the first line of input. py-shell-prompt-read-only ------------------------- If non-nil, the python prompt is read only. Setting this variable will only effect new shells. py-honor-IPYTHONDIR-p --------------------- When non-nil ipython-history file is constructed by $IPYTHONDIR followed by "/history". Default is nil. Otherwise value of py-ipython-history is used. py-ipython-history ------------------ ipython-history default file. Used when py-honor-IPYTHONDIR-p is nil (default) py-honor-PYTHONHISTORY-p ------------------------ When non-nil python-history file is set by $PYTHONHISTORY Default is nil. Otherwise value of py-python-history is used. py-python-history ----------------- python-history default file. Used when py-honor-PYTHONHISTORY-p is nil (default) py-switch-buffers-on-execute-p ------------------------------ When non-nil switch to the Python output buffer. If `py-keep-windows-configuration' is t, this will take precedence over setting here. py-split-window-on-execute -------------------------- When non-nil split windows. Default is just-two - when code is send to interpreter, split screen into source-code buffer and current py-shell result. Other buffer will be hidden that way. When set to `t', python-mode tries to reuse existing windows and will split only if needed. With 'always, results will displayed in a new window. Both `t' and `always' is experimental still. For the moment: If a multitude of python-shells/buffers should be visible, open them manually and set `py-keep-windows-configuration' to `t'. py-split-windows-on-execute-function ------------------------------------ How window should get splitted to display results of py-execute-... functions. py-hide-show-keywords --------------------- Keywords composing visible heads. py-hide-show-hide-docstrings ---------------------------- Controls if doc strings can be hidden by hide-show py-hide-comments-when-hiding-all -------------------------------- Hide the comments too when you do an `hs-hide-all'. py-outline-mode-keywords ------------------------ Keywords composing visible heads. python-mode-hook ---------------- Hook run after entering python-mode-modeline-display mode. No problems result if this variable is not bound. `add-hook' automatically binds it. (This is true for all hook variables.) py-shell-name ------------- A PATH/TO/EXECUTABLE or default value `py-shell' may look for, if no shell is specified by command. On Windows default is C:/Python27/python --there is no garantee it exists, please check your system-- Else python py-python-command ----------------- Make sure, the directory where python.exe resides in in the PATH-variable. Windows: If needed, edit in "Advanced System Settings/Environment Variables" Commonly "C:\\Python27\\python.exe" With Anaconda for example the following works here: "C:\\Users\\My-User-Name\\Anaconda\\Scripts\\python.exe" Else /usr/bin/python py-python-command-args ---------------------- String arguments to be used when starting a Python shell. py-python2-command ------------------ Make sure, the directory where python.exe resides in in the PATH-variable. Windows: If needed, edit in "Advanced System Settings/Environment Variables" Commonly "C:\\Python27\\python.exe" With Anaconda for example the following works here: "C:\\Users\\My-User-Name\\Anaconda\\Scripts\\python.exe" Else /usr/bin/python py-python2-command-args ----------------------- String arguments to be used when starting a Python shell. py-python3-command ------------------ A PATH/TO/EXECUTABLE or default value `py-shell' may look for, if no shell is specified by command. On Windows see C:/Python3/python.exe --there is no garantee it exists, please check your system-- At GNU systems see /usr/bin/python3 py-python3-command-args ----------------------- String arguments to be used when starting a Python3 shell. py-ipython-command ------------------ A PATH/TO/EXECUTABLE or default value `M-x IPython RET' may look for, if no IPython-shell is specified by command. On Windows default is "C:\\Python27\\python.exe" While with Anaconda for example the following works here: "C:\\Users\\My-User-Name\\Anaconda\\Scripts\\ipython.exe" Else /usr/bin/ipython py-ipython-command-args ----------------------- String arguments to be used when starting a Python shell. At Windows make sure ipython-script.py is PATH. Also setting PATH/TO/SCRIPT here should work, for example; C:\Python27\Scripts\ipython-script.py With Anaconda the following is known to work: "C:\\Users\\My-User-Name\\Anaconda\\Scripts\\ipython-script-py" py-jython-command ----------------- A PATH/TO/EXECUTABLE or default value `M-x Jython RET' may look for, if no Jython-shell is specified by command. Not known to work at windows Default /usr/bin/jython py-jython-command-args ---------------------- String arguments to be used when starting a Python shell. py-shell-toggle-1 ----------------- A PATH/TO/EXECUTABLE or default value used by `py-toggle-shell'. py-shell-toggle-2 ----------------- A PATH/TO/EXECUTABLE or default value used by `py-toggle-shell'. py--imenu-create-index-p ------------------------ Non-nil means Python mode creates and displays an index menu of functions and global variables. py-match-paren-mode ------------------- Non-nil means, cursor will jump to beginning or end of a block. This vice versa, to beginning first. Sets `py-match-paren-key' in python-mode-map. Customize `py-match-paren-key' which key to use. py-match-paren-key ------------------ String used by M-x comment-region to comment out a block of code. This should follow the convention for non-indenting comment lines so that the indentation commands won't get confused (i.e., the string should be of the form `#x...' where `x' is not a blank or a tab, and `...' is arbitrary). However, this string should not end in whitespace. py-kill-empty-line ------------------ If t, py-indent-forward-line kills empty lines. py-imenu-show-method-args-p --------------------------- Controls echoing of arguments of functions & methods in the Imenu buffer. When non-nil, arguments are printed. py-use-local-default -------------------- If `t', py-shell will use `py-shell-local-path' instead of default Python. Making switch between several virtualenv's easier, `python-mode' should deliver an installer, so named-shells pointing to virtualenv's will be available. py-edit-only-p -------------- When `t' `python-mode' will not take resort nor check for installed Python executables. Default is nil. See bug report at launchpad, lp:944093. py-force-py-shell-name-p ------------------------ When `t', execution with kind of Python specified in `py-shell-name' is enforced, possibly shebang doesn't take precedence. python-mode-v5-behavior-p ------------------------- Execute region through `shell-command-on-region' as v5 did it - lp:990079. This might fail with certain chars - see UnicodeEncodeError lp:550661 py-trailing-whitespace-smart-delete-p ------------------------------------- Default is nil. When t, python-mode calls (add-hook 'before-save-hook 'delete-trailing-whitespace nil 'local) Also commands may delete trailing whitespace by the way. When editing other peoples code, this may produce a larger diff than expected py-newline-delete-trailing-whitespace-p --------------------------------------- Delete trailing whitespace maybe left by `py-newline-and-indent'. Default is `t'. See lp:1100892 py--warn-tmp-files-left-p ------------------------- Messages a warning, when `py-temp-directory' contains files susceptible being left by previous Python-mode sessions. See also lp:987534 py-complete-ac-sources ---------------------- List of auto-complete sources assigned to `ac-sources' in `py-complete-initialize'. Default is known to work an Ubuntu 14.10 - having python- mode, pymacs and auto-complete-el, with the following minimal emacs initialization: (require 'pymacs) (require 'auto-complete-config) (ac-config-default) py-remove-cwd-from-path ----------------------- Whether to allow loading of Python modules from the current directory. If this is non-nil, Emacs removes '' from sys.path when starting a Python process. This is the default, for security reasons, as it is easy for the Python process to be started without the user's realization (e.g. to perform completion). py-shell-local-path ------------------- If `py-use-local-default' is non-nil, `py-shell' will use EXECUTABLE indicated here incl. path. py-python-edit-version ---------------------- When not empty, fontify according to Python version specified. Default is the empty string, a useful value "python3" maybe. When empty, version is guessed via `py-choose-shell'. py-ipython-execute-delay ------------------------ Delay needed by execute functions when no IPython shell is running. py--imenu-create-index-function ------------------------------- Switch between `py--imenu-create-index-new', which also lists modules variables, and series 5. index-machine py-docstring-style ------------------ Implemented styles are DJANGO, ONETWO, PEP-257, PEP-257-NN, SYMMETRIC, and NIL. A value of NIL won't care about quotes position and will treat docstrings a normal string, any other value may result in one of the following docstring styles: DJANGO: """ Process foo, return bar. """ """ Process foo, return bar. If processing fails throw ProcessingError. """ ONETWO: """Process foo, return bar.""" """ Process foo, return bar. If processing fails throw ProcessingError. """ PEP-257: """Process foo, return bar.""" """Process foo, return bar. If processing fails throw ProcessingError. """ PEP-257-NN: """Process foo, return bar.""" """Process foo, return bar. If processing fails throw ProcessingError. """ SYMMETRIC: """Process foo, return bar.""" """ Process foo, return bar. If processing fails throw ProcessingError. """ py-execute-directory -------------------- When set, stores the file's default directory-name py-execute-... functions act upon. Used by Python-shell for output of `py-execute-buffer' and related commands. See also `py-use-current-dir-when-execute-p' py-use-current-dir-when-execute-p --------------------------------- When `t', current directory is used by Python-shell for output of `py-execute-buffer' and related commands. See also `py-execute-directory' py-keep-shell-dir-when-execute-p -------------------------------- Don't change Python shell's current working directory when sending code. See also `py-execute-directory' py-fileless-buffer-use-default-directory-p ------------------------------------------ When `py-use-current-dir-when-execute-p' is non-nil and no buffer-file exists, value of `default-directory' sets current working directory of Python output shell py-check-command ---------------- Command used to check a Python file. py-ffap-p --------- Select python-modes way to find file at point. Default is nil py-keep-windows-configuration ----------------------------- Takes precedence over `py-split-window-on-execute' and `py-switch-buffers-on-execute-p'. See lp:1239498 To suppres window-changes due to error-signaling also, set `py-keep-windows-configuration' onto 'force Default is nil py-shell-prompt-regexp ---------------------- Regular Expression matching top-level input prompt of python shell. It should not contain a caret (^) at the beginning. py-shell-prompt-output-regexp ----------------------------- Regular Expression matching output prompt of python shell. It should not contain a caret (^) at the beginning. py-debug-p ---------- When non-nil, keep resp. store information useful for debugging. Temporary files are not deleted. Other functions might implement some logging etc. py-section-start ---------------- Delimit arbitrary chunks of code. py-section-end -------------- Delimit arbitrary chunks of code. py-paragraph-re --------------- An empty line followed by a non-whitespace at column 1 py-compilation-regexp-alist --------------------------- Fetch errors from Py-shell. hooked into `compilation-error-regexp-alist' py-underscore-word-syntax-p --------------------------- If underscore chars should be of syntax-class `word', not of `symbol'. Underscores in word-class makes `forward-word' etc. travel the indentifiers. Default is `t'. See bug report at launchpad, lp:940812