Sending different color codes in python at certain times

[Kimzer]

Hi all..

Looking for some help here.
Using below script.
Trying to add the following functions:

I want the pir sensor to basically do nothing between midnight and 0500. So disabled at certain times, but button should work still.

I want to be able to send different colors to the lights at certain times of the day.
So if motion is detected between 7am and 12 am it will be this color code sendt {"on" : True, "bri" : 255, "sat" : 0, "hue" : 0} but when its between 8pm and 23pm this will be sendt {"on" : True, "bri" : 255, "sat" : 173, "hue" : 333} for example.

Any easy way of achieving this? I have tried defining the command called when sending the color codes but im at a standstill here.

import sys
sys.path.append("/home/pi/.local/lib/python2.7/site-packages")

from phue import Bridge
import RPi.GPIO as GPIO
import time
import datetime
print 'Waiting for network...'
time.sleep(30)
print 'The wait is over. It\'s showtime!'
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BCM)
GPIO.setup(4, GPIO.IN) #Read output from PIR motion sensor
GPIO.setup(18, GPIO.IN, pull_up_down=GPIO.PUD_UP) #Read output from button.
b=Bridge('192.168.1.47')
try:
    b.connect()
except ImportError:
    print "Import error occurred!"
print "Connected to Hue bridge!"

lightson=b.get_light(2, "on")
if lightson: print "Lights are already on."
print 'Entering infinite loop...'

light_on_delay = 15  # time in min for light to stay on when button pressed
button_pressed = 0

while True:
# check for button press
input_state = GPIO.input(18)
if input_state == False:
    print('Button Pressed')
    end = (light_on_delay * 1) + time.time()
    button_pressed = 1
    command =  {"on" : True, "bri" : 255, "sat" : 0, "hue" : 0}
    b.set_group(2, command)
    lightson=True
    print('Lights are on for 15 minutes')    

# check if button has been pressed if it has check to see if time is up
if button_pressed == 1:
    if time.time() > end:
        button_pressed = 0

else:

    i=GPIO.input(4)
    timestamp=datetime.datetime.now().time()
    if (timestamp < offstarttime and timestamp > offendtime):
    if i==0:            #When output from motion sensor is LOW
        print ('No movement detected - Turning lights off')
        b.set_group(2, 'on', False) 
        lightson=False
        print ('Lights are off')
        time.sleep(0.1)
    else:               #When output from motion sensor is HIGH
        print ('Movement detected - Turning lights on')
        command =  {"on" : True, "bri" : 255, "sat" : 0, "hue" : 0}
        b.set_group(2, command)
        lightson=True
        print ('Lights are on.')
        time.sleep(5)    

# added delay to prevent program using 100% cpu time.
time.sleep(0.5)

[snippsat]

Something like this with a in_between function.

from datetime import datetime, time

def in_between(now, start, end):
    if start <= end:
        return start <= now < end
    else:
        return start <= now or now < end

Test:

>>> now = datetime.now().time()
>>> now
datetime.time(10, 39, 7, 444963)
>>> print("8 to 23" if in_between(now, time(8), time(23)) else "Some other time")
8 to 23
>>> print("8 to 23" if in_between(now, time(14), time(23)) else "Some other time")
Some other time

[Kimzer]

Not quite what i was after. This is how i currently do it, but its way too slow and sluggish.

import requests
import time
 
colors = {'white':'{"on":true,"bri":255,"sat":0,"hue":0}',
          'blue':'{"on":true,"bri":255,"sat":255,"hue":46920}',
          'red':'{"on":true,"bri":255,"sat":255,"hue":0}',
          'yellow':'{"on":true,"bri":255,"sat":255,"hue":12750}'}
 
hour = time.localtime().tm_hour
 
time_colors = {(0,2):'red', (2,7):'blue', (7, 20):'white', (20,24):'yellow'}
color_schema  = {hour:color for hours, color in time_colors.items() for hour in range(hours[0], hours[1])}
color = colors[color_schema[hour]]

 
headers = {
    'Accept': 'application/json',
}
 
requests.put('http://192.168.1.47/api/xxxxxxxxxxxxxxxxxxx/lights/2/state', headers=headers, data=color)

[Kimzer]

Anyone that would be able to help me out here? :)

[gontajones]

time_colors = {'red':(0,2),'blue':(2,7),'white':(7, 20),'yellow':(20,24)}
for k,v in time_colors.items():
    if(v[0] <= hour < v[1]):
        print(colors[k])
        break