Eclipse Linux is an experimental Void Linux (musl) based distribution that boots with the dynamod init system. This repository contains the build tooling to generate a live ISO (BIOS + UEFI) and a TUI installer.

• Target architecture: x86_64
• Base: Void Linux musl rootfs tarball + packages installed via xbps in a chroot
• Output: a hybrid live ISO with SquashFS rootfs and GRUB boot (BIOS + UEFI)

• Makefile — main entrypoints (make iso, make test-qemu, etc.)
• scripts/build-rootfs.sh — builds build/rootfs from a Void musl rootfs tarball
• scripts/build-iso.sh — turns build/rootfs into build/eclipse-linux-<version>.iso
• scripts/eclipse-install — dialog-based installer that runs inside the live ISO
• config/ — branding and boot config (os-release, motd, issue, grub-live.cfg)

The build expects a dynamod/ directory at the repo root (see Makefile and the scripts). It is intentionally ignored by .gitignore, so you need to provide it locally (e.g. clone it into ./dynamod).

You need a Linux host with sudo and the ability to mount, chroot, and create loop devices.

The ISO builder checks for these commands:

• mksquashfs (from squashfs-tools)
• xorriso
• grub-mkimage, grub-mkstandalone
• mformat, mmd, mcopy (from mtools)
• cpio, gzip

The rootfs builder also needs tar with xz support and either wget or curl.

Package hints (also printed by the scripts):

• Void: xbps-install -S squashfs-tools xorriso grub grub-x86_64-efi mtools cpio
• Arch: pacman -S squashfs-tools xorriso grub mtools cpio

• qemu-system-x86_64
• qemu-img (only for make test-qemu-install)

1. Build the init system bits (runs unprivileged):

make dynamod

2. Build the root filesystem (invokes sudo internally):

make rootfs

3. Build the ISO (invokes sudo internally):

make iso

The ISO is written to:

• build/eclipse-linux-<ECLIPSE_VERSION>.iso

After make iso:

make test-qemu          # graphical
make test-qemu-serial   # serial console
make test-qemu-install  # boots with a blank qcow2 disk

build-iso.sh prints a dd example. Be careful to choose the correct device:

sudo dd if=build/eclipse-linux-<version>.iso of=/dev/sdX bs=4M status=progress oflag=sync

Environment variables used by the scripts:

• ECLIPSE_VERSION — ISO filename version string (default 0.1.0)
• VOID_DATE — Void rootfs tarball date stamp (default 20250202)

Examples:

ECLIPSE_VERSION=0.2.0 make iso
VOID_DATE=20250202 make rootfs

• make dynamod should not be run under sudo (it builds as the current user).
• scripts/build-rootfs.sh removes firmware blobs and most locales to shrink the live ISO; expect Wi‑Fi / some GPUs to be missing firmware in the live environment.

GPL-3.0 (see LICENSE).