Mailman 3 জানুয়ারি 2017 - Python-Dev

PEP 448 review
by Guido van Rossum 29 মার্চ, 2023

29 মার্চ, 2023

I'm back, I've re-read the PEP, and I've re-read the long thread with "(no subject)". I think Georg Brandl nailed it: """ *I like the "sequence and dict flattening" part of the PEP, mostly because itis consistent and should be easy to understand, but the comprehension syntaxenhancements seem to be bad for readability and "comprehending" what the codedoes.The call syntax part is a mixed bag on the one hand it is nice to be consistent with the extended possibilities in literals (flattening), but on the other hand there would be small but annoying inconsistencies anyways (e.g. the duplicate kwarg case above).* """ Greg Ewing followed up explaining that the inconsistency between dict flattening and call syntax is inherent in the pre-existing different rules for dicts vs. keyword args: {'a':1, 'a':2} results in {'a':2}, while f(a=1, a=2) is an error. (This form is a SyntaxError; the dynamic case f(a=1, **{'a': 1}) is a TypeError.) For me, allowing f(*a, *b) and f(**d, **e) and all the other combinations for function calls proposed by the PEP is an easy +1 -- it's a straightforward extension of the existing pattern, and anybody who knows what f(x, *a) does will understand f(x, *a, y, *b). Guessing what f(**d, **e) means shouldn't be hard either. Understanding the edge case for duplicate keys with f(**d, **e) is a little harder, but the error messages are pretty clear, and it is not a new edge case. The sequence and dict flattening syntax proposals are also clean and logical -- we already have *-unpacking on the receiving side, so allowing *x in tuple expressions reads pretty naturally (and the similarity with *a in argument lists certainly helps). From here, having [a, *x, b, *y] is also natural, and then the extension to other displays is natural: {a, *x, b, *y} and {a:1, **d, b:2, **e}. This, too, gets a +1 from me. So that leaves comprehensions. IIRC, during the development of the patch we realized that f(*x for x in xs) is sufficiently ambiguous that we decided to disallow it -- note that f(x for x in xs) is already somewhat of a special case because an argument can only be a "bare" generator expression if it is the only argument. The same reasoning doesn't apply (in that form) to list, set and dict comprehensions -- while f(x for x in xs) is identical in meaning to f((x for x in xs)), [x for x in xs] is NOT the same as [(x for x in xs)] (that's a list of one element, and the element is a generator expression). The basic premise of this part of the proposal is that if you have a few iterables, the new proposal (without comprehensions) lets you create a list or generator expression that iterates over all of them, essentially flattening them: >>> xs = [1, 2, 3] >>> ys = ['abc', 'def'] >>> zs = [99] >>> [*xs, *ys, *zs] [1, 2, 3, 'abc', 'def', 99] >>> But now suppose you have a list of iterables: >>> xss = [[1, 2, 3], ['abc', 'def'], [99]] >>> [*xss[0], *xss[1], *xss[2]] [1, 2, 3, 'abc', 'def', 99] >>> Wouldn't it be nice if you could write the latter using a comprehension? >>> xss = [[1, 2, 3], ['abc', 'def'], [99]] >>> [*xs for xs in xss] [1, 2, 3, 'abc', 'def', 99] >>> This is somewhat seductive, and the following is even nicer: the *xs position may be an expression, e.g.: >>> xss = [[1, 2, 3], ['abc', 'def'], [99]] >>> [*xs[:2] for xs in xss] [1, 2, 'abc', 'def', 99] >>> On the other hand, I had to explore the possibilities here by experimenting in the interpreter, and I discovered some odd edge cases (e.g. you can parenthesize the starred expression, but that seems a syntactic accident). All in all I am personally +0 on the comprehension part of the PEP, and I like that it provides a way to "flatten" a sequence of sequences, but I think very few people in the thread have supported this part. Therefore I would like to ask Neil to update the PEP and the patch to take out the comprehension part, so that the two "easy wins" can make it into Python 3.5 (basically, I am accepting two-thirds of the PEP :-). There is some time yet until alpha 2. I would also like code reviewers (Benjamin?) to start reviewing the patch <http://bugs.python.org/issue2292>, taking into account that the comprehension part needs to be removed. -- --Guido van Rossum (python.org/~guido)

7 17

PEP 1, PEP Purpose and Guidelines
by barry＠zope.com 18 মে, 2021

18 মে, 2021

It has been a while since I posted a copy of PEP 1 to the mailing lists and newsgroups. I've recently done some updating of a few sections, so in the interest of gaining wider community participation in the Python development process, I'm posting the latest revision of PEP 1 here. A version of the PEP is always available on-line at http://www.python.org/peps/pep-0001.html Enjoy, -Barry -------------------- snip snip -------------------- PEP: 1 Title: PEP Purpose and Guidelines Version: $Revision: 1.36 $ Last-Modified: $Date: 2002/07/29 18:34:59 $ Author: Barry A. Warsaw, Jeremy Hylton Status: Active Type: Informational Created: 13-Jun-2000 Post-History: 21-Mar-2001, 29-Jul-2002 What is a PEP? PEP stands for Python Enhancement Proposal. A PEP is a design document providing information to the Python community, or describing a new feature for Python. The PEP should provide a concise technical specification of the feature and a rationale for the feature. We intend PEPs to be the primary mechanisms for proposing new features, for collecting community input on an issue, and for documenting the design decisions that have gone into Python. The PEP author is responsible for building consensus within the community and documenting dissenting opinions. Because the PEPs are maintained as plain text files under CVS control, their revision history is the historical record of the feature proposal[1]. Kinds of PEPs There are two kinds of PEPs. A standards track PEP describes a new feature or implementation for Python. An informational PEP describes a Python design issue, or provides general guidelines or information to the Python community, but does not propose a new feature. Informational PEPs do not necessarily represent a Python community consensus or recommendation, so users and implementors are free to ignore informational PEPs or follow their advice. PEP Work Flow The PEP editor, Barry Warsaw <peps(a)python.org>, assigns numbers for each PEP and changes its status. The PEP process begins with a new idea for Python. It is highly recommended that a single PEP contain a single key proposal or new idea. The more focussed the PEP, the more successfully it tends to be. The PEP editor reserves the right to reject PEP proposals if they appear too unfocussed or too broad. If in doubt, split your PEP into several well-focussed ones. Each PEP must have a champion -- someone who writes the PEP using the style and format described below, shepherds the discussions in the appropriate forums, and attempts to build community consensus around the idea. The PEP champion (a.k.a. Author) should first attempt to ascertain whether the idea is PEP-able. Small enhancements or patches often don't need a PEP and can be injected into the Python development work flow with a patch submission to the SourceForge patch manager[2] or feature request tracker[3]. The PEP champion then emails the PEP editor <peps(a)python.org> with a proposed title and a rough, but fleshed out, draft of the PEP. This draft must be written in PEP style as described below. If the PEP editor approves, he will assign the PEP a number, label it as standards track or informational, give it status 'draft', and create and check-in the initial draft of the PEP. The PEP editor will not unreasonably deny a PEP. Reasons for denying PEP status include duplication of effort, being technically unsound, not providing proper motivation or addressing backwards compatibility, or not in keeping with the Python philosophy. The BDFL (Benevolent Dictator for Life, Guido van Rossum) can be consulted during the approval phase, and is the final arbitrator of the draft's PEP-ability. If a pre-PEP is rejected, the author may elect to take the pre-PEP to the comp.lang.python newsgroup (a.k.a. python-list(a)python.org mailing list) to help flesh it out, gain feedback and consensus from the community at large, and improve the PEP for re-submission. The author of the PEP is then responsible for posting the PEP to the community forums, and marshaling community support for it. As updates are necessary, the PEP author can check in new versions if they have CVS commit permissions, or can email new PEP versions to the PEP editor for committing. Standards track PEPs consists of two parts, a design document and a reference implementation. The PEP should be reviewed and accepted before a reference implementation is begun, unless a reference implementation will aid people in studying the PEP. Standards Track PEPs must include an implementation - in the form of code, patch, or URL to same - before it can be considered Final. PEP authors are responsible for collecting community feedback on a PEP before submitting it for review. A PEP that has not been discussed on python-list(a)python.org and/or python-dev(a)python.org will not be accepted. However, wherever possible, long open-ended discussions on public mailing lists should be avoided. Strategies to keep the discussions efficient include, setting up a separate SIG mailing list for the topic, having the PEP author accept private comments in the early design phases, etc. PEP authors should use their discretion here. Once the authors have completed a PEP, they must inform the PEP editor that it is ready for review. PEPs are reviewed by the BDFL and his chosen consultants, who may accept or reject a PEP or send it back to the author(s) for revision. Once a PEP has been accepted, the reference implementation must be completed. When the reference implementation is complete and accepted by the BDFL, the status will be changed to `Final.' A PEP can also be assigned status `Deferred.' The PEP author or editor can assign the PEP this status when no progress is being made on the PEP. Once a PEP is deferred, the PEP editor can re-assign it to draft status. A PEP can also be `Rejected'. Perhaps after all is said and done it was not a good idea. It is still important to have a record of this fact. PEPs can also be replaced by a different PEP, rendering the original obsolete. This is intended for Informational PEPs, where version 2 of an API can replace version 1. PEP work flow is as follows: Draft -> Accepted -> Final -> Replaced ^ +----> Rejected v Deferred Some informational PEPs may also have a status of `Active' if they are never meant to be completed. E.g. PEP 1. What belongs in a successful PEP? Each PEP should have the following parts: 1. Preamble -- RFC822 style headers containing meta-data about the PEP, including the PEP number, a short descriptive title (limited to a maximum of 44 characters), the names, and optionally the contact info for each author, etc. 2. Abstract -- a short (~200 word) description of the technical issue being addressed. 3. Copyright/public domain -- Each PEP must either be explicitly labelled as placed in the public domain (see this PEP as an example) or licensed under the Open Publication License[4]. 4. Specification -- The technical specification should describe the syntax and semantics of any new language feature. The specification should be detailed enough to allow competing, interoperable implementations for any of the current Python platforms (CPython, JPython, Python .NET). 5. Motivation -- The motivation is critical for PEPs that want to change the Python language. It should clearly explain why the existing language specification is inadequate to address the problem that the PEP solves. PEP submissions without sufficient motivation may be rejected outright. 6. Rationale -- The rationale fleshes out the specification by describing what motivated the design and why particular design decisions were made. It should describe alternate designs that were considered and related work, e.g. how the feature is supported in other languages. The rationale should provide evidence of consensus within the community and discuss important objections or concerns raised during discussion. 7. Backwards Compatibility -- All PEPs that introduce backwards incompatibilities must include a section describing these incompatibilities and their severity. The PEP must explain how the author proposes to deal with these incompatibilities. PEP submissions without a sufficient backwards compatibility treatise may be rejected outright. 8. Reference Implementation -- The reference implementation must be completed before any PEP is given status 'Final,' but it need not be completed before the PEP is accepted. It is better to finish the specification and rationale first and reach consensus on it before writing code. The final implementation must include test code and documentation appropriate for either the Python language reference or the standard library reference. PEP Template PEPs are written in plain ASCII text, and should adhere to a rigid style. There is a Python script that parses this style and converts the plain text PEP to HTML for viewing on the web[5]. PEP 9 contains a boilerplate[7] template you can use to get started writing your PEP. Each PEP must begin with an RFC822 style header preamble. The headers must appear in the following order. Headers marked with `*' are optional and are described below. All other headers are required. PEP: <pep number> Title: <pep title> Version: <cvs version string> Last-Modified: <cvs date string> Author: <list of authors' real names and optionally, email addrs> * Discussions-To: <email address> Status: <Draft | Active | Accepted | Deferred | Final | Replaced> Type: <Informational | Standards Track> * Requires: <pep numbers> Created: <date created on, in dd-mmm-yyyy format> * Python-Version: <version number> Post-History: <dates of postings to python-list and python-dev> * Replaces: <pep number> * Replaced-By: <pep number> The Author: header lists the names and optionally, the email addresses of all the authors/owners of the PEP. The format of the author entry should be address(a)dom.ain (Random J. User) if the email address is included, and just Random J. User if the address is not given. If there are multiple authors, each should be on a separate line following RFC 822 continuation line conventions. Note that personal email addresses in PEPs will be obscured as a defense against spam harvesters. Standards track PEPs must have a Python-Version: header which indicates the version of Python that the feature will be released with. Informational PEPs do not need a Python-Version: header. While a PEP is in private discussions (usually during the initial Draft phase), a Discussions-To: header will indicate the mailing list or URL where the PEP is being discussed. No Discussions-To: header is necessary if the PEP is being discussed privately with the author, or on the python-list or python-dev email mailing lists. Note that email addresses in the Discussions-To: header will not be obscured. Created: records the date that the PEP was assigned a number, while Post-History: is used to record the dates of when new versions of the PEP are posted to python-list and/or python-dev. Both headers should be in dd-mmm-yyyy format, e.g. 14-Aug-2001. PEPs may have a Requires: header, indicating the PEP numbers that this PEP depends on. PEPs may also have a Replaced-By: header indicating that a PEP has been rendered obsolete by a later document; the value is the number of the PEP that replaces the current document. The newer PEP must have a Replaces: header containing the number of the PEP that it rendered obsolete. PEP Formatting Requirements PEP headings must begin in column zero and the initial letter of each word must be capitalized as in book titles. Acronyms should be in all capitals. The body of each section must be indented 4 spaces. Code samples inside body sections should be indented a further 4 spaces, and other indentation can be used as required to make the text readable. You must use two blank lines between the last line of a section's body and the next section heading. You must adhere to the Emacs convention of adding two spaces at the end of every sentence. You should fill your paragraphs to column 70, but under no circumstances should your lines extend past column 79. If your code samples spill over column 79, you should rewrite them. Tab characters must never appear in the document at all. A PEP should include the standard Emacs stanza included by example at the bottom of this PEP. A PEP must contain a Copyright section, and it is strongly recommended to put the PEP in the public domain. When referencing an external web page in the body of a PEP, you should include the title of the page in the text, with a footnote reference to the URL. Do not include the URL in the body text of the PEP. E.g. Refer to the Python Language web site [1] for more details. ... [1] http://www.python.org When referring to another PEP, include the PEP number in the body text, such as "PEP 1". The title may optionally appear. Add a footnote reference that includes the PEP's title and author. It may optionally include the explicit URL on a separate line, but only in the References section. Note that the pep2html.py script will calculate URLs automatically, e.g.: ... Refer to PEP 1 [7] for more information about PEP style ... References [7] PEP 1, PEP Purpose and Guidelines, Warsaw, Hylton http://www.python.org/peps/pep-0001.html If you decide to provide an explicit URL for a PEP, please use this as the URL template: http://www.python.org/peps/pep-xxxx.html PEP numbers in URLs must be padded with zeros from the left, so as to be exactly 4 characters wide, however PEP numbers in text are never padded. Reporting PEP Bugs, or Submitting PEP Updates How you report a bug, or submit a PEP update depends on several factors, such as the maturity of the PEP, the preferences of the PEP author, and the nature of your comments. For the early draft stages of the PEP, it's probably best to send your comments and changes directly to the PEP author. For more mature, or finished PEPs you may want to submit corrections to the SourceForge bug manager[6] or better yet, the SourceForge patch manager[2] so that your changes don't get lost. If the PEP author is a SF developer, assign the bug/patch to him, otherwise assign it to the PEP editor. When in doubt about where to send your changes, please check first with the PEP author and/or PEP editor. PEP authors who are also SF committers, can update the PEPs themselves by using "cvs commit" to commit their changes. Remember to also push the formatted PEP text out to the web by doing the following: % python pep2html.py -i NUM where NUM is the number of the PEP you want to push out. See % python pep2html.py --help for details. Transferring PEP Ownership It occasionally becomes necessary to transfer ownership of PEPs to a new champion. In general, we'd like to retain the original author as a co-author of the transferred PEP, but that's really up to the original author. A good reason to transfer ownership is because the original author no longer has the time or interest in updating it or following through with the PEP process, or has fallen off the face of the 'net (i.e. is unreachable or not responding to email). A bad reason to transfer ownership is because you don't agree with the direction of the PEP. We try to build consensus around a PEP, but if that's not possible, you can always submit a competing PEP. If you are interested assuming ownership of a PEP, send a message asking to take over, addressed to both the original author and the PEP editor <peps(a)python.org>. If the original author doesn't respond to email in a timely manner, the PEP editor will make a unilateral decision (it's not like such decisions can be reversed. :). References and Footnotes [1] This historical record is available by the normal CVS commands for retrieving older revisions. For those without direct access to the CVS tree, you can browse the current and past PEP revisions via the SourceForge web site at http://cvs.sourceforge.net/cgi-bin/cvsweb.cgi/python/nondist/peps/?cvsroot=… [2] http://sourceforge.net/tracker/?group_id=5470&atid=305470 [3] http://sourceforge.net/tracker/?atid=355470&group_id=5470&func=browse [4] http://www.opencontent.org/openpub/ [5] The script referred to here is pep2html.py, which lives in the same directory in the CVS tree as the PEPs themselves. Try "pep2html.py --help" for details. The URL for viewing PEPs on the web is http://www.python.org/peps/ [6] http://sourceforge.net/tracker/?group_id=5470&atid=305470 [7] PEP 9, Sample PEP Template http://www.python.org/peps/pep-0009.html Copyright This document has been placed in the public domain. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End:

8 14

congrats on 3.5! Alas, windows 7 users are having problems installing it
by Laura Creighton 15 সেপ্টেম্বর, 2019

15 সেপ্টেম্বর, 2019

webmaster has already heard from 4 people who cannot install it. I sent them to the bug tracker or to python-list but they seem not to have gone either place. Is there some guide I should be sending them to, 'how to debug installation problems'? Laura

5 6

OpenIndiana and Solaris support
by Victor Stinner 27 মার্চ, 2017

27 মার্চ, 2017

Hi, My question is simple: do we officially support Solaris and/or OpenIndiana? Jesus Cea runs an OpenIndiana buildbot slave: http://buildbot.python.org/all/buildslaves/cea-indiana-x86 "Open Indiana 32 bits" The platform module of Python says "Solaris-2.11", I don't know the exact OpenIndiana version. A lot of unit tests fail on this buildbot with MemoryError. I guess that it's related to Solaris which doesn't allow overcommit (allocating more memory than available memory on the system), or more simply because the slave has not enough memory. There is now an issue which seems specific to OpenIndiana: http://bugs.python.org/issue27847 It might impact Solaris as well, but the Solaris buildbot is offline since "684 builds". Five years ago, I reported a bug because the curses module of Python 3 doesn't build on Solaris nor OpenIndiana anymore. It seems like the bug was not fixed, and the issue is still open: http://bugs.python.org/issue13552 So my question is if we officially support Solaris and/or OpenIndiana. If yes, how can we fix issues when we only have buildbot slave which has memory errors, and no SSH access to this server? Solaris doesn't seem to be officially supported in Python, so I suggest to drop the OpenIndiana buildbot (which is failing since at least 2 years) and close all Solaris issues as "WONTFIX". Victor

6 12

Heads up: possible double-comments on bpo for commits
by Brett Cannon 2 ফেব্রুয়ারি, 2017

2 ফেব্রুয়ারি, 2017

I've activated the webhook for receiving comments on issues when a commit lands mentioning an issue, so if you see a commit from our hg integration and another from GitHub, understand that's why (mention issues as "bpo NNNN" in commit messages if you want to see it in action). If it becomes too much of a hassle to see the duplicates before we migrate I can turn off the notifications, but obviously more testing the better. :)

3 5

re performance
by Sven R. Kunze 2 ফেব্রুয়ারি, 2017

2 ফেব্রুয়ারি, 2017

Hi folks, I recently refreshed regular expressions theoretical basics *indulging in reminiscences* So, I read https://swtch.com/~rsc/regexp/regexp1.html However, reaching the chart in the lower third of the article, I saw Python 2.4 measured against a naive Thompson matching implementation. And I was surprised about how bad it performed compared to an unoptimized version of an older than dirt algorithm. So, I decided to give it a try with Python2.7 and Python3.5. Eh, voilà, 100% cpu and no results so far. Nothing has changed at all since 2007. >>> import re >>> re.match(r'a?'*30 + r'a'*30, 'a'*30) .... (still waiting) Quoting from the article: " Some might argue that this test is unfair to the backtracking implementations, since it focuses on an uncommon corner case. This argument misses the point: given a choice between an implementation with a predictable, consistent, fast running time on all inputs or one that usually runs quickly but can take years of CPU time (or more) on some inputs, the decision should be easy." Victor, as the head of Python performance department, and Matthew, as the maintainer of the new regex module, what is your stance on this particular issue? From my perspective, I can say, that regular expressions might worth optimizing especially for web applications (url matching usually uses regexes) but also for other applications where I've seen many tight loops using regexes as well. So, I am probing interest on this topic here. Best, Sven

22 38

Investigating Python memory footprint of one real Web application
by INADA Naoki 2 ফেব্রুয়ারি, 2017

2 ফেব্রুয়ারি, 2017

Hi, all. After reading Instagram's blog article [1], I’m thinking about how Python can reduce memory usage of Web applications. My company creating API server with Flask, SQLAlchemy and typing. (sorry, it's closed source). So I can get some data from it's codebase. [1]: https://engineering.instagram.com/dismissing-python-garbage-collection-at-i… Report is here https://gist.github.com/methane/ce723adb9a4d32d32dc7525b738d3c31 My thoughts are: * Interning (None,) seems worth enough. * There are many empty dicts. Allocating ma_keys lazily may reduce memory usage. * Most large strings are docstring. Is it worth enough that option for trim docstrings, without disabling asserts? * typing may increase memory footprint, through functions __attributes__ and abc. * Can we add option to remove or lazy evaluate __attributes__ ? * Using string literal for annotating generic type may reduce WeakRef usage. * Since typing will be used very widely in this year. Need more investigating.

9 32

SSL certificates recommendations for downstream python packagers
by David Cournapeau 1 ফেব্রুয়ারি, 2017

1 ফেব্রুয়ারি, 2017

Hi, I am managing the team responsible for providing python packaging at Enthought, and I would like to make sure we are providing a good (and secure) out of the box experience for SSL. My understanding is that PEP 476 is the latest PEP that concerns this issue, and that PEP recommends using the system store: https://www.python.org/dev/peps/pep-0476/#trust-database. But looking at binary python distributions from python.org, that does not seem to a.ways be the case. I looked at the following: * 3.5.3 from python.org for OS X (64 bits): this uses the old, system openssl * 3.6.0 from python.org for OS X: this embeds a recent openssl, but ssl seems to be configured to use non existing paths (ssl..get_default_verify_paths()), and indeed, cert validation seems to fail by default with those installers * 3.6.0 from python.org for windows: I have not found how the ssl module finds the certificate, but certification seems to work Are there any official recommendations for downstream packagers beyond PEP 476 ? Is it "acceptable" for downstream packagers to patch python's default cert locations ? David

5 18

Generator objects and list comprehensions?
by Craig Rodrigues 31 জানুয়ারি, 2017

31 জানুয়ারি, 2017

Hi, Glyph pointed this out to me here: http://twistedmatrix.com/pipermail/twisted-python/2017-January/031106.html If I do this on Python 3.6: >> [(yield 1) for x in range(10)] <generator object <listcomp> at 0x10cd210f8> If I understand this: https://docs.python.org/3/reference/expressions.html#list-displays then this is a list display and should give a list, not a generator object. Is there a bug in Python, or does the documentation need to be updated? -- Craig

9 10

January's almost gone but there's still time to book your project capacity now
by Anglian Architectural 30 জানুয়ারি, 2017

30 জানুয়ারি, 2017

No Images? Click here Glazing & Rainscreen Systems - Concept to Completion CASE STUDIES ROOFLIGHTS CONTACT ANGLIAN ARCHITECTURAL GLAZING & RAINSCREEN SYSTEMS **FIRE RATED ALUMINIUM AND STEEL GLAZING SYSTEMS** Dear Sirs JANUARY HAS FLOWN BY... ...BUT YOU CAN BOOK THAT JOB IN WHILE WE'VE STILL GOT CAPACITY Where has January gone to? Yes, we're now into the last week of the month and wish to say thanks to those clients who took up my offer to look at fast track work following my last email – we still have some immediate capacity at the present time but the 2017 order book is filling fast. So please keep those enquiries flowing - and existing customers - please don’t leave it till the last minute because we always want to say “YES WE CAN” to you especially !! MTV Studios This month we feature more of our work in London - this time at MTV Studios in Camden, where we have installed curtain walling, complete with bris soleil and various feature cladding, as well as recreating and refurbishing feature elements from previous phases and a new rooflight. Good photographs have been difficult to source due to the extremely tight nature of this site but we hope to get this job up on our website very soon - especially given the prestigious nature of the work carried out. Portfolio Youcan see Anglian’s wide portfolio of work here on our website and we are happy to quote Aluminium Glazing and Rainscreen Systems projects from £100k to £2m value. And finally, throughout 2017 please remember the website WWW.DIYROOFLIGHTS.COM New customers are finding our SLIMGLAZE and SG2 Rooflights every month. We hope you will take a look because at £298 net ex works for a 1m x 1m double glazed stock unit they are competitively priced and available fast. We still believe that these are the BEST PRICES in the marketplace, but if you know otherwise, please let me know. Triple glazed Rooflights are also available and you can see the range of Rooflights here. Please bookmark the website WWW.DIYROOFLIGHTS.COM for when you need it ! Best wishes for 2017 and we hope we can do business with you in this new year. Kind regards, Trevor Kirby Managing Director Ask Anglian! UK fabricators and installers that can manufacture bespoke solutions for refurbs and new builds, including curved head and fire rated windows. Visit the website for more information. Slimglaze and SG2 Rooflights Anglian Architectural Slimglaze Rooflights are competitively priced and designed for installation on flat roofs. They come glazed and silicone sealed ready for installation. Please follow this link for pricing and more information. You can also see a number of Slimglaze examples here. "ANGLIAN ARCHITECTURAL MANUFACTURE AND INSTALL FIRE RATED GLAZING SYSTEMS!!" 10 good reasons you should ask us to tender for your next project: • Expert sub-contractor with big reputation for quality and efficiency • Integrated capability includes design, surveying, manufacturing and installation • Complete start-to-finish solution • In-house design, fabrication and project management • Critical product specification • Problem solving • Industry recognised systems and components • All Quality Accreditations ISO 9001, ISO 14001, ISO 18001, CHAS • Long experience working with major Contractors and High Street brands • Competitive prices and value for money, guaranteed. For more information please visit the website, phone 01485 520860 Quality Service Experience ANGLIAN ARCHITECTURAL LIMITED Unit 1, Mill Lane, Waterford Industrial Est. Gt. Massingham Norfolk PE32 2HT Tel: 01485 520860 Fax: 01485 521196 Visit the Anglian Architectural website Email for more information Follow us on Twitter Anglian Architectural are approved suppliers of Aluminium and Steel FIRE RATED GLAZING SYSTEMS and registered with Constructionline Anglian Architectural Ltd, Unit 1 Mill Lane, Waterford Industrial Estate, Great Massingham, Norfolk PE32 2HT Company No: 04346652 Preferences | Unsubscribe

1 0